Calculators

Final Gravity Calculator

Estimate final gravity from original gravity and apparent attenuation. Enter gravity readings as specific gravity values, such as 1.050, and attenuation as a percentage from your yeast or recipe estimate.

Loading calculator...

What this Final Gravity Calculator does

The Final Gravity Calculator estimates the specific gravity (SG) a beer may reach after fermentation. It uses two inputs: original gravity, the wort’s specific gravity before fermentation, and apparent attenuation, the percentage of fermentable extract the yeast is expected to consume. The result is an estimate expressed as specific gravity, for example 1.013 SG.

This is a planning aid for homebrewers. It can help you compare a recipe’s expected finish with a measured hydrometer or refractometer reading. It does not measure fermentation, determine whether beer is ready to package, or account for every ingredient and brewing condition. Actual gravity depends on the wort, yeast, fermentation environment, and measurement method.

The calculation is based on the standard apparent attenuation relationship. It treats the gravity points above 1.000 as the portion that can be reduced by fermentation, then leaves the unattenuated portion in the estimate. For a wort at 1.050 with 75% apparent attenuation, the estimated final gravity is 1.013 SG.

How to use the Final Gravity Calculator

Enter the original gravity as a specific gravity reading, using the usual format with 1.000 as water. Enter apparent attenuation as a percentage. Use a value from the yeast manufacturer or recipe when available, and remember it describes an expected range of yeast performance under particular conditions.

  • Original gravity (SG): Use the gravity measured before fermentation. For example, enter 1.050 for a wort with fifty gravity points above 1.000.
  • Apparent attenuation (%): Enter the percentage estimate, such as 75 for seventy-five percent. Do not enter 0.75.
  • Read the result: The displayed SG is a model estimate, not a fermentation endpoint test.

Keep precision consistent when taking readings. A hydrometer reading may need temperature correction according to its calibration instructions. Refractometer readings taken after fermentation need an appropriate correction method because alcohol changes how the sample refracts light. The calculator assumes the original gravity number supplied is already suitable for use.

How the Final Gravity Calculator formula works

The formula is 1 + ((original gravity − 1) × (1 − attenuation / 100)). First, it subtracts 1.000 from original gravity to find the gravity points above water. Next, it converts attenuation from a percentage to a fraction and calculates the part that remains. Finally, it adds those remaining points back to 1.000.

Worked example: suppose a pale ale wort has an original gravity of 1.050 and the expected apparent attenuation is 75%. The points above 1.000 are 1.050 − 1.000 = 0.050. The remaining fraction is 1 − 75/100 = 0.25. Multiplying gives 0.050 × 0.25 = 0.0125. Adding 1.000 gives 1.0125, which rounds to an estimated final gravity of 1.013 SG.

Apparent attenuation is calculated from gravity readings and is not the same as the percentage of sugar removed by weight. Because alcohol is less dense than water, apparent attenuation does not directly describe the beer’s true extract loss. The calculator applies the common recipe-planning relationship and should be interpreted on that basis.

Use cases for the Final Gravity Calculator

Homebrewers can use an estimate to set expectations while planning a batch or reviewing fermentation data. For example, it can show how a yeast strain’s expected attenuation might affect the finish of a wort with a known starting gravity. It can also help a brewer compare recipe versions when the grain bill or target original gravity changes.

Some practical uses include:

  • Estimating a target gravity for a recipe sheet before brewing.
  • Comparing two yeast options with different published attenuation ranges.
  • Checking whether a measured reading is broadly near the recipe’s expected finish.
  • Planning a tasting discussion about body and sweetness, while recognizing that gravity alone does not determine either sensation.

In the last case, treat the result as one clue. A higher final gravity can be associated with more residual extract, but perceived sweetness and body also depend on malt composition, alcohol, carbonation, bitterness, water, and serving conditions.

Other factors to consider when calculating final gravity

Fermentation performance varies. Yeast health, pitch rate, oxygen availability before fermentation, temperature, nutrient availability, and wort composition can all affect attenuation. A manufacturer's figure is generally a guide from defined test conditions, not a guarantee for every homebrew recipe. Highly fermentable wort can finish differently from a wort rich in dextrins even when the same yeast is used.

Recipe ingredients matter too. Mash temperature and duration influence the balance of fermentable sugars and less fermentable carbohydrates. Specialty malts, adjuncts, and brewing processes can change that balance. The simple formula does not take these details as separate inputs, so use an attenuation estimate appropriate to the specific recipe and yeast.

For an actual batch, take gravity readings with a calibrated instrument and follow its measurement guidance. If readings remain unchanged over an appropriate interval, that can help assess whether fermentation has stopped, but gravity stability alone should be interpreted alongside sound brewing practice. Do not package based only on this estimate: continued fermentation in a sealed bottle or keg can create excess pressure. Use measured readings and your normal process for deciding when fermentation is complete.

Final Gravity Calculator FAQ

What is final gravity?

Final gravity is the specific gravity of beer after fermentation has finished. It reflects the density of the beer relative to water and is commonly used with original gravity to describe fermentation and estimate alcohol by volume.

What does apparent attenuation mean?

Apparent attenuation is the percentage reduction in gravity points from original to final gravity. Yeast product information often gives an expected range, but the result varies with wort composition and fermentation conditions.

Can this estimate tell me when fermentation is complete?

No. It predicts a likely value from the entered inputs. Confirm fermentation progress with properly measured gravity readings over time and your established brewing process.

Why is my measured final gravity different?

Your wort may have a different fermentability than assumed, or the yeast may attenuate differently under your conditions. Measurement temperature, instrument calibration, sampling, and refractometer correction can also affect readings.

Should I use this result as a bottling target?

Use it as a planning reference only. Base packaging decisions on measured gravity and safe, consistent fermentation practice, since the estimate cannot confirm that a particular batch is finished.

Written by

kassiksbrew.com Editorial Team

Editorial team

Independent editorial coverage of beer & home brewing.